Universal 80-180 Watt 2-4 Bolt Hole Replacement 12 Volt Electric Fan Motor-Replacement Parts-American Volt-80 Watt-American Volt
Universal 80-180 Watt 2-4 Bolt Hole Replacement 12 Volt Electric Fan Motor-Replacement Parts-American Volt-80 Watt-American Volt
Universal 80-180 Watt 2-4 Bolt Hole Replacement 12 Volt Electric Fan Motor-Replacement Parts-American Volt-130 Watt-American Volt
Universal 80-180 Watt 2-4 Bolt Hole Replacement 12 Volt Electric Fan Motor-Replacement Parts-American Volt-180 Watt-American Volt
Universal 80-180 Watt 2-4 Bolt Hole Replacement 12 Volt Electric Fan Motor-Replacement Parts-American Volt-80 Watt-American Volt
Universal 80-180 Watt 2-4 Bolt Hole Replacement 12 Volt Electric Fan Motor-Replacement Parts-American Volt-80 Watt-American Volt
Universal 80-180 Watt 2-4 Bolt Hole Replacement 12 Volt Electric Fan Motor-Replacement Parts-American Volt-80 Watt-American Volt

80 Up To 180 Watt 2, 3 or 4 Bolt Hole Pattern Replacement 12 Volt Electric Radiator Cooling Fan Motor

SKU:
Availability : In Stock Pre order Out of stock

Universal bolt-on replacement 12 volt electrical fan motors. Save time and money with a motor vs. entire fan replacement. Powerful highest wattage...

$39.95From $34.95

Motor Size: Choose an option

Choose an option
80 Watt
90 Watt
120 Watt
130 Watt
180 Watt
Order in the next [totalHours] hours %M minutes to get it between and
Description
  • Universal bolt-on replacement 12 volt electrical fan motors.
  • Save time and money with a motor vs. entire fan replacement.
  • Powerful highest wattage motors will keep your engine cool.
  • Sealed to be dust and water resistant, increasing longevity.
  • 2 or 3 or 4 bolt patterns fit most common brand electric fans.
  • Simple install after removing fan blade nut and motor screws.
  • For automotive vehicles and also general engineering projects.

80-90 Watt, 2-Bolt Hole Pattern:

  • Distance between each hole center is 4.5" inches.
  • Overall motor housing diameter is 4.25" inches.
  • Motor front to shaft end length is 2.25" inches.
  • Standard equipment on our 6-13 inch fans.
  • Fits most fan shrouds with a 2 bolt pattern.

120-130 Watt, 3-Bolt Hole Pattern:

  • Mounts are slightly recessed compared to picture.
  • Distance between each hole center is 4" inches.
  • Overall diameter of the motor housing is 4.25" inches.
  • Motor front to threaded shaft end length is 3" inches.
  • Standard equipment on our 12-15 inch fans.
  • Fits most fan shrouds with a 3 bolt pattern.

180 Watt, 4-Bolt Hole Pattern:

  • Distance between each hole center is 4" inches.
  • Overall diameter of the motor housing is 4.25" inches.
  • Motor front to threaded shaft end length is 4" inches.
  • Standard equipment on our 12-17 inch fans.
  • Fits most fan shrouds with a 4 bolt pattern.
NPT Size Guide

NPT - American Standard Pipe Thread/Taper Guide:

NPT is not a measured size, but rather an industry call out size.
The NPT call out designation is not the true thread diameter inside or out.

PROBE THREAD SIZE

ACTUAL OUTSIDE DIAMETER

1/8" NPT 0.405" (Approx. 13/32")
1/4" NPT 0.540" (Approx. 1/2")
3/8" NPT 0.675" (Approx. 5/8")
1/2" NPT 0.840" (Approx. 7/8")
AN Size Guide

AN Fitting Size Guide:

The AN numbers refer to the tubing OD in sixteenths of an inch.

AN SIZE

MALE THREAD SIZE

TUBE SIZE (NOMINAL OD)
HOSE ID
4AN 7/16"-20 1/4" 0.22"
6AN 9/16"-18 3/8" 0.34"
8AN 3/4"-16 1/2" 0.44"
10AN 7/8"-14 5/8" 0.56"
12AN 1 1/16"-12 3/4" 0.69"