Adjustable Electric Fan Engine Radiator Cooling Thermostat Controller Temperature Switch - American Volt
Adjustable Electric Fan Engine Radiator Cooling Thermostat Controller Temperature Switch - American Volt
Adjustable Electric Fan Engine Radiator Cooling Thermostat Controller Temperature Switch - American Volt
Adjustable Electric Fan Engine Radiator Cooling Thermostat Controller Temperature Switch - American Volt
Adjustable Electric Fan Engine Radiator Cooling Thermostat Controller Temperature Switch - American Volt
Adjustable Electric Fan Engine Radiator Cooling Thermostat Controller Temperature Switch - American Volt

KIT DE SONDA DEL CONTROLADOR DEL TERMOSTATO DEL VENTILADOR ELÉCTRICO AJUSTABLE DEL RADIADOR

SKU: AV-T69
Availability : In Stock Pre order Out of stock

Termostato de ventilador ajustable American Volt con sensor de sonda de temperatura. La sonda mide la temperatura del líquido o de contacto...

$24.95 $19.95 SAVE 20%
Order in the next [totalHours] hours %M minutes to get it between and
Description
  • Termostato de ventilador ajustable American Volt con sensor de sonda de temperatura.
  • La sonda mide la temperatura del líquido o de contacto y envía energía al ventilador.
  • Rango flexible de control de temperatura de encendido / apagado de 32-248 ° F 0-120 ° C.).
  • El diseño de 3 pines permite conectar el interruptor como un circuito normalmente abierto O cerrado.
  • La sonda se puede montar entre las aletas del radiador o dentro del tubo de entrada / salida.
  • La temperatura de apagado es siempre 15 grados menor que la de encendido.
  • El dial del termostato tiene marcas de temperatura en grados Celsius y Fahrenheit.
  • El cable del termostato capilar tiene 30 pulgadas de largo.
  • Instrucciones de cableado detalladas y diagrama incluidos en el paquete.
  • Combínelo con uno de nuestros ventiladores de enfriamiento eléctricos universales personalizados de 12V.

El kit incluye:

(1 termostato de ventilador ajustablet
(Dial de 2 giros con tornillos de montajes
(2 conectores hembras
NPT Size Guide

NPT - American Standard Pipe Thread/Taper Guide:


NPT is not a measured size, but rather an industry call out size.
The NPT call out designation is not the true thread diameter inside or out.

PROBE THREAD SIZE

ACTUAL OUTSIDE DIAMETER

1/8" NPT 0.405" (Approx. 13/32")
1/4" NPT 0.540" (Approx. 1/2")
3/8" NPT 0.675" (Approx. 5/8")
1/2" NPT 0.840" (Approx. 7/8")
AN Size Guide

AN Fitting Size Guide:


The AN numbers refer to the tubing OD in sixteenths of an inch.

AN SIZE

MALE THREAD SIZE

TUBE SIZE (NOMINAL OD)
HOSE ID
4AN 7/16"-20 1/4" 0.22"
6AN 9/16"-18 3/8" 0.34"
8AN 3/4"-16 1/2" 0.44"
10AN 7/8"-14 5/8" 0.56"
12AN 1 1/16"-12 3/4" 0.69"