Engine Transmission Oil Cooler In-Line Hose Fitting Electric Fan Temperature Thermostat Switch Kit
Transmission oil cooler in-hose fitting & electric fan temp switch. Select your adapter AN size with barb push-on hose end fittings. Switch closes at...
Order in the next [totalHours] hours %M minutes to get it between and
- Transmission oil cooler in-hose fitting & electric fan temp switch.
- Select your adapter AN size with barb push-on hose end fittings.
- Switch closes at selected turn-on temperature and powers fan.
- Turn-off temperature is preset at 15 degrees less than turn-on.
- Mounts on engine or transmission oil cooler hose line near inlet.
- Measures all liquid temperatures including water, coolant and oil.
NPT Size Guide
NPT - American Standard Pipe Thread/Taper Guide:
NPT is not a measured size, but rather an industry call out size.
The NPT call out designation is not the true thread diameter inside or out.
PROBE THREAD SIZE
ACTUAL OUTSIDE DIAMETER
|1/8" NPT||0.405" (Approx. 13/32")|
|1/4" NPT||0.540" (Approx. 1/2")|
|3/8" NPT||0.675" (Approx. 5/8")|
|1/2" NPT||0.840" (Approx. 7/8")|
AN Size Guide
AN Fitting Size Guide:
The AN numbers refer to the tubing OD in sixteenths of an inch.
MALE THREAD SIZE
TUBE SIZE (NOMINAL OD)