120'F Normally Closed Electric Thermostat Switch 1/8" 1/4" 3/8" 1/2" Inch NPT Water Temperature Sensor Probe
Normally closed automotive engine thermostat switch sensor. Grounds or powers device upon ignition and turns off at 120'F. When temperature drops below 105'F...
Order in the next [totalHours] hours %M minutes to get it between and
Description
- Normally closed automotive engine thermostat switch sensor.
- Grounds or powers device upon ignition and turns off at 120'F.
- When temperature drops below 105'F the switch will re-close.
- Threads into engine block, radiator, manifold, water hose, etc.
- Measures temperature of any liquid, including motor oil.
- Also great for a cold start advance or winter engine heaters.
- Length from top of the probe threads to the tip is 0.5" inches.
NPT Size Guide
NPT - American Standard Pipe Thread/Taper Guide:
NPT is not a measured size, but rather an industry call out size.
The NPT call out designation is not the true thread diameter inside or out.
PROBE THREAD SIZE |
ACTUAL OUTSIDE DIAMETER |
1/8" NPT | 0.405" (Approx. 13/32") |
1/4" NPT | 0.540" (Approx. 1/2") |
3/8" NPT | 0.675" (Approx. 5/8") |
1/2" NPT | 0.840" (Approx. 7/8") |
AN Size Guide
AN Fitting Size Guide:
The AN numbers refer to the tubing OD in sixteenths of an inch.
AN SIZE |
MALE THREAD SIZE |
TUBE SIZE (NOMINAL OD) | HOSE ID |
4AN | 7/16"-20 | 1/4" | 0.22" |
6AN | 9/16"-18 | 3/8" | 0.34" |
8AN | 3/4"-16 | 1/2" | 0.44" |
10AN | 7/8"-14 | 5/8" | 0.56" |
12AN | 1 1/16"-12 | 3/4" | 0.69" |