140'F-210'F Electric Cooling Fan Thermostat Temp Sensor Push-In Radiator Fin Probe A/C Override Switch Wiring Kit
Wiring Kit: Universal automotive electric fan 5-pin 40A relay switch harness kit. 14AWG size wire powers 1-2 cooling fans or 12 volt...
Order in the next [totalHours] hours %M minutes to get it between and
- Universal automotive electric fan 5-pin 40A relay switch harness kit.
- 14AWG size wire powers 1-2 cooling fans or 12 volt auto accessories.
- Maximum 30 amp continuous draw with 30A in-line fuse protection.
- A/C override or manual toggle switch wire built directly into harness.
- Installation instructions, wiring diagram and components included.
- Dual pin electric cooling fan powering thermostat switch and probe.
- Solid brass push-in fin probe temperature sensor can be cut to size.
- Preset to power fan or auto accessory at the selected temperature.
- Probe holds the switch to radiator, engine or transmission cooler fins.
- Measures surface temperature of radiators or automotive oil coolers.
NPT Size Guide
NPT - American Standard Pipe Thread/Taper Guide:
NPT is not a measured size, but rather an industry call out size.
The NPT call out designation is not the true thread diameter inside or out.
PROBE THREAD SIZE
ACTUAL OUTSIDE DIAMETER
|1/8" NPT||0.405" (Approx. 13/32")|
|1/4" NPT||0.540" (Approx. 1/2")|
|3/8" NPT||0.675" (Approx. 5/8")|
|1/2" NPT||0.840" (Approx. 7/8")|
AN Size Guide
AN Fitting Size Guide:
The AN numbers refer to the tubing OD in sixteenths of an inch.
MALE THREAD SIZE
TUBE SIZE (NOMINAL OD)